Overview Base element Side element Front element Hinged cover
Basic element - variations
Create the base element according to your wishes, choose between different colours, or tell us your preferred colour. We can also customise the base element to your requirements with printing or cut-outs (for DIP switches, for example).
Choice of colour and additional functions (bus / FE)
Order No.:
not yet available, only on request
Insulating material:

Labelling and individual cut-outs
The position of the printing and the cut-outs on sides A and B depend on the position shown in the sketch of the base element (snap foot below)
No individual printing and cut-outs
Only side A
Only side B
Side AB identical
Side AB different

Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold, Germany

E-mail: info@weidmueller.com
Phone +49 5231 14-0
Fax +49 5231 14-292083
Legal details

File upload for labelling and individual cut-outs
Request CAD model
Format selection:
Send to e-mail address:

Send Cancel
Save project locally
You can save the current project locally. You can open a previously saved project and change the selections and quantities.
You can also start a new project.
New project
Open project
Project Download
File Save
Select the circuit board position
Depending on the configuration and make up of your electronics, up to three circuit boards can be mounted in different positions in the housing.

Structurally, there are two spacings between the solder side and the outer walls: 2.3 mm and 5 mm.

You choose the placement of the circuit boards and we provide the appropriate male headers.

In "Dimensions of circuit boards" you can compare the available heights on the solder and component sides.