Mounting rail bus system for CH20M housings
When supplying, connecting or distributing within modular applications, the rail bus can replace the tedious individual wiring process with a flexible and uninterrupted system solution.
Bus-Contact Block
Bus-Contact Block

add Bus-Contact Block

add Bus-PCB
Profile for Bus-PCB
Profile for Bus-PCB

add Profile for Bus-PCB
Cover Profile for Bus-PCB
Cover Profile for Bus-PCB

add Cover Profile for Bus-PCB

Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold, Germany

E-mail: info@weidmueller.com
Phone +49 5231 14-0
Fax +49 5231 14-292083
Legal details

File upload for labelling and individual cut-outs
Request CAD model
Format selection:
Send to e-mail address:

Send Cancel
Save project locally
You can save the current project locally. You can open a previously saved project and change the selections and quantities.
You can also start a new project.
New project
Open project
Project Download
File Save
Select the circuit board position
Depending on the configuration and make up of your electronics, up to three circuit boards can be mounted in different positions in the housing.

Structurally, there are two spacings between the solder side and the outer walls: 2.3 mm and 5 mm.

You choose the placement of the circuit boards and we provide the appropriate male headers.

In "Dimensions of circuit boards" you can compare the available heights on the solder and component sides.